China Good quality Polyurethane Hydraulic Cylinder Oil Seal Y Shaft with Yxd/Idu Wear-Resistant Pressure Small D Oil Seal U-Ring vacuum pump connector

Product Description

Hydraulic seal ring

 

High quality raw materials

Can in the high temperature of 100 degrees Celsius, maintain its compression deformation and hardness unchanged and keep good resilience.

5 minutes, 180 degrees of high temperature secondary sulfide sulfide system

Mold precision, tolerance size small. Adhere to the standard 5 minutes vulcanization system, and each product is 180 degree high temperature secondary vulcanization 10 hours.

10 million spot stock specifications

Own factory, various models, sizes complete, a large number of spot inventory, year-round stock tens of millions of pieces.

Non-standard can be customized processing

Can accurately processed within 2000 mm. Arbitrary cross section, any material of sealing ring.

Section and indicating installation groove

– a one-way function u-shaped coil –
– the piston rod and piston seals –

– symmetric type, single lip –

Technical parameters

Pressure: 32 mpa, or less when the pressure is higher than 20 mpa, recommend the use of retaining ring.Temperature: – 30 ° ºC ~ + 80 ºCSpeed: reciprocating < 0.8 M/SMedium: oil, hydraulic oil, emulsion, does not apply to environmental safety hydraulic oil (bio-oil) material: high-performance imported polyurethane (TPU), shaw hardness (SHA) 93 °

Product display

DHS                                                                                                                                                                                        Temperature: – 45 ° ºC ~ + 110 ° ºCReciprocating speed: 0.8 M/S or lessMedium: oil, hydraulic oil, emulsion, does not apply to environmental safety hydraulic oil materials: hardness of 90 degrees of polyurethane

IDU type is suitable for China’s machinery market for the piston rod seals, can use Chinese standard JB/ZQ4264 groove design.Application: apply pressure: 32 mpa or less,Temperature: – 40 ° ºC ~ + 80 ºCSpeed: reciprocating < 0.5 M/S

USH type can be used for the piston and piston rod seal, this seal has a smaller cross section, can be used for a wide range of operation, the use of nitrile rubber and fluorine rubber material can ensure a broader range of working temperature range, has wide use range.Scope of application:Job stress: < 21 mpa,Working temperature: standard nitrile rubber (NBR) – 30 ºC ~ 100 ºCResistant mat type fluoro rubber (FKM) – 50 ° ºC to 250 ºCReciprocating speed: < 0.5 M/SMedium: NBR general petroleum base hydraulic oil, water, ethylene glycol hydraulic oil, oil emulsion type hydraulic oil monohydrate; FKM general petroleum base hydraulic oil, high temperature, acid and alkali medium materials such as: standard material for nitrile butadiene rubber, shaw hardness of 90 degrees.

ODU type is suitable for China’s machinery market use special seal, piston groove design can use Chinese standard JB/ZQ4264.Application: apply pressure: 32 mpa or lessTemperature: – 40 ° ºC ~ + 80 ºCReciprocating speed: 0.5 M/S or lessMedium: mineral oil, airNote: to prevent extrusion, recommended used in more than 140 bar pressure at the seal with retaining ring at the bottom.Material: hardness 90 imported polyurethane materials.

FJ type dustproof sealing ringScope of application: temperature: – 40 ºC ~ + 100 ºCSurface speed: < 2 m/SMedium: general petroleum base hydraulic oil, water, ethylene glycol hydraulic oil, oil monohydrate emulsion type hydraulic oil, water and air.Installation: to avoid damage of the sealing lip, when installation should take measures to avoid the sharp edge.Material: shaw hardness of 90 degrees imported polyurethane

QYD type is in accordance with Chinese standard cylinder piston seal for special purpose, by Chinese standards JB/T6656 groove design.Scope of application:Pressure: < 1.6 MPATemperature: – 20 ° ºC ~ + 80 ºCReciprocating speed: 0.5 M/S or lessMedium: compressed airMaterial: hardness 80 high-performance NBR.

Waterproof and oil resistant to ageing

With a variety of sizes can be customized

HangZhou farce, sen technology co., LTD focus on high-end seal production and research and development. Our goal is: constant innovation and improve quality, omni-directional to provide clients with the most professional sealing system solutions. Welcome your consultation!

After-sales Service: Worry Free After Sale
Warranty: Worry Free After Sale
Monthly Production: 1200000
Material: PU
Type: Un /Uhs /Dhs /Yxd
Shape: O-Ring
Samples:
US$ 0.1/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

hydraulic cylinder

How do hydraulic cylinders contribute to the overall cost-effectiveness of industrial processes?

Hydraulic cylinders play a crucial role in enhancing the overall cost-effectiveness of industrial processes. They offer several advantages and contribute to increased productivity, improved efficiency, reduced maintenance costs, and enhanced operational performance. Here’s a detailed explanation of how hydraulic cylinders contribute to the cost-effectiveness of industrial processes:

1. High Power Density:

– Hydraulic cylinders provide a high power-to-weight ratio, allowing them to generate substantial force in a compact design. This power density enables the use of smaller and lighter equipment, reducing material and manufacturing costs, and increasing the efficiency of industrial processes.

2. Precise Force and Position Control:

– Hydraulic cylinders offer precise force and position control, allowing for accurate movement and positioning of machinery or workpieces. This level of control enhances process efficiency, reduces material waste, and improves overall product quality. Precise force control also minimizes the risk of equipment damage, further reducing maintenance and repair costs.

3. High Load Handling Capacity:

– Hydraulic cylinders are known for their ability to handle high loads. They can exert significant force, making them suitable for heavy-duty industrial applications. By efficiently handling heavy loads, hydraulic cylinders contribute to increased productivity and throughput, reducing the need for additional equipment and streamlining industrial processes.

4. Flexibility and Versatility:

– Hydraulic cylinders offer a high degree of flexibility and versatility in industrial processes. They can be easily integrated into various types of machinery and equipment, allowing for diverse applications. This adaptability reduces the need for specialized equipment, resulting in cost savings and increased operational efficiency.

5. Energy Efficiency:

– Hydraulic systems, including hydraulic cylinders, can be designed to operate with high energy efficiency. By utilizing efficient hydraulic circuit designs, advanced control systems, and energy recovery mechanisms, hydraulic cylinders minimize energy waste and reduce operational costs. Energy-efficient hydraulic systems also contribute to a more sustainable and environmentally friendly industrial operation.

6. Durability and Longevity:

– Hydraulic cylinders are built to withstand demanding industrial environments and heavy usage. They are constructed with robust materials and undergo stringent quality control measures to ensure durability and longevity. Their ability to withstand harsh conditions and repetitive motion reduces the need for frequent replacements, minimizing downtime and maintenance costs.

7. Reduced Maintenance Requirements:

– Hydraulic cylinders require relatively low maintenance compared to other types of actuators. Properly designed hydraulic systems with efficient filtration and contamination control mechanisms can prevent damage to the cylinders and extend their service life. Reduced maintenance requirements result in lower downtime, decreased labor costs, and improved cost-effectiveness of industrial processes.

8. System Integration and Automation:

– Hydraulic cylinders can be seamlessly integrated into automated industrial processes. By incorporating hydraulic cylinders into automated systems, tasks can be performed with precision and repeatability, reducing human error and optimizing efficiency. Automation also allows for continuous operation, increasing productivity and overall cost-effectiveness.

9. Cost-Effective Replacement:

– In situations where hydraulic cylinders require replacement or repair, the cost-effectiveness of the process is still maintained. Hydraulic cylinders are typically modular in design, allowing for easy replacement of individual components or complete units. This modularity reduces downtime and associated costs, as only the affected components need to be replaced, rather than the entire system.

In summary, hydraulic cylinders contribute to the overall cost-effectiveness of industrial processes through their high power density, precise control capabilities, high load handling capacity, flexibility, energy efficiency, durability, reduced maintenance requirements, system integration, and cost-effective replacement options. Their ability to enhance productivity, efficiency, and operational performance while minimizing maintenance and downtime costs makes hydraulic cylinders a valuable component in various industrial applications.

hydraulic cylinder

Impact of Hydraulic Cylinders on Overall Productivity of Manufacturing Operations

Hydraulic cylinders play a crucial role in enhancing the overall productivity of manufacturing operations. These versatile devices are widely used in various industrial applications due to their ability to generate powerful and controlled linear motion. Let’s explore how hydraulic cylinders impact the overall productivity of manufacturing operations:

  1. Powerful Force Generation: Hydraulic cylinders are capable of generating high forces, which enables them to handle heavy loads and perform demanding tasks. By providing the necessary force, hydraulic cylinders facilitate efficient and effective operation of machinery and equipment in manufacturing processes. This ability to exert substantial force contributes to increased productivity by enabling the handling of larger workpieces, enhancing process efficiency, and reducing manual labor requirements.
  2. Precision and Control: Hydraulic cylinders offer precise control over the movement of loads, allowing for accurate positioning, alignment, and repetitive tasks. The smooth and controlled linear motion provided by hydraulic cylinders ensures precise operation in manufacturing processes, such as assembly, material handling, and machining. This precision and control minimize errors, rework, and scrap, leading to improved productivity and higher-quality output.
  3. Speed and Efficiency: Hydraulic cylinders can operate at high speeds, enabling rapid movement and cycle times in manufacturing operations. The combination of high force and speed allows for faster operation of machinery and equipment, reducing production cycle times and increasing overall throughput. By optimizing the speed and efficiency of manufacturing processes, hydraulic cylinders contribute to improved productivity and output.
  4. Flexibility and Adaptability: Hydraulic cylinders are highly flexible and adaptable to different manufacturing applications. They can be customized to meet specific requirements, such as load capacity, stroke length, and mounting options. This versatility allows hydraulic cylinders to be integrated into a wide range of machinery and equipment, accommodating diverse manufacturing needs. The ability to adapt to different tasks and environments enhances overall productivity by enabling efficient utilization of resources and facilitating process optimization.
  5. Reliability and Durability: Hydraulic cylinders are known for their robustness and durability, making them suitable for demanding manufacturing environments. Their ability to withstand heavy loads, repeated use, and harsh operating conditions ensures reliable performance over extended periods. Minimizing downtime due to cylinder failure or maintenance requirements contributes to increased productivity and uninterrupted manufacturing operations.

In summary, hydraulic cylinders have a significant impact on the overall productivity of manufacturing operations. Their powerful force generation, precision and control, speed and efficiency, flexibility and adaptability, as well as reliability and durability, contribute to optimized processes, increased throughput, improved quality, and reduced labor requirements. By leveraging the capabilities of hydraulic cylinders, manufacturers can enhance productivity, streamline operations, and achieve greater efficiency in their manufacturing processes.

hydraulic cylinder

How do hydraulic cylinders contribute to the efficiency of heavy machinery like excavators?

Hydraulic cylinders play a crucial role in enhancing the efficiency and performance of heavy machinery, such as excavators. These powerful hydraulic actuators enable excavators to perform various tasks efficiently and effectively. Here’s a detailed explanation of how hydraulic cylinders contribute to the efficiency of heavy machinery like excavators:

1. Force and Power:

– Hydraulic cylinders provide the necessary force and power required for the excavation process. They convert hydraulic energy from the hydraulic fluid into linear mechanical force, allowing the excavator to exert significant pushing and pulling forces. The force generated by hydraulic cylinders enables the digging arm or boom of the excavator to penetrate and break through tough materials, such as soil, rocks, or concrete, with ease and efficiency.

2. Precise Control:

– Hydraulic cylinders offer precise control over the movement of excavator components. By regulating the flow of hydraulic fluid to the cylinders, operators can control the speed, direction, and positioning of the excavator’s arm, boom, bucket, and other attachments. This precise control allows operators to perform delicate operations, such as fine grading or precise material placement, with accuracy and efficiency.

3. Versatility and Adaptability:

– Hydraulic cylinders enable excavators to perform a wide range of tasks by facilitating the quick and easy interchangeability of attachments. Excavators can be equipped with various specialized attachments, including buckets, breakers, grapples, and augers, which can be efficiently connected and disconnected using hydraulic cylinders. This versatility and adaptability enhance the efficiency of excavators by enabling them to tackle different tasks without the need for extensive manual adjustments or downtime.

4. Increased Productivity:

– The power and control provided by hydraulic cylinders significantly increase the productivity of excavators. Excavators equipped with hydraulic cylinders can complete tasks more quickly and efficiently compared to manual or mechanically-driven machinery. The precise control over movements allows for faster cycle times, reduced idle time, and improved overall productivity on the worksite.

5. Enhanced Digging and Lifting Capabilities:

– Hydraulic cylinders enable excavators to perform digging and lifting operations with enhanced capabilities. The force generated by hydraulic cylinders allows excavators to dig deeper and lift heavier loads compared to other types of machinery. This increased digging and lifting capacity contributes to the efficiency of excavators by reducing the number of passes required to complete a task and improving overall productivity.

6. Durability and Reliability:

– Hydraulic cylinders are designed to withstand heavy loads, challenging operating conditions, and frequent use. They are built with robust materials, such as high-strength steel, and undergo stringent quality control measures during manufacturing. The durability and reliability of hydraulic cylinders ensure that excavators can operate efficiently even in demanding environments, minimizing downtime and maximizing productivity.

7. Energy Efficiency:

– Hydraulic systems, including hydraulic cylinders, are known for their energy efficiency. Hydraulic cylinders can deliver high force outputs while consuming relatively low amounts of hydraulic fluid. This energy efficiency translates to lower fuel consumption and reduced operating costs for excavators. The efficient use of hydraulic power contributes to the overall efficiency and sustainability of heavy machinery operations.

8. Safety:

– Hydraulic cylinders play a vital role in ensuring the safety of excavator operations. They provide controlled and predictable movements, reducing the risk of sudden or uncontrolled motions. The precise control offered by hydraulic cylinders allows operators to perform tasks safely and accurately, minimizing the chances of accidents or damage to the machinery or surrounding environment.

Overall, hydraulic cylinders are essential components that significantly contribute to the efficiency of heavy machinery like excavators. By providing force, precise control, versatility, increased productivity, enhanced capabilities, durability, energy efficiency, and safety, hydraulic cylinders enable excavators to perform a wide range of tasks efficiently and effectively in various industries, including construction, mining, and landscaping.

China Good quality Polyurethane Hydraulic Cylinder Oil Seal Y Shaft with Yxd/Idu Wear-Resistant Pressure Small D Oil Seal U-Ring   vacuum pump connector	China Good quality Polyurethane Hydraulic Cylinder Oil Seal Y Shaft with Yxd/Idu Wear-Resistant Pressure Small D Oil Seal U-Ring   vacuum pump connector
editor by CX 2023-10-30